As the pneumatic tools are generally used as a portable tool to require small light, so that through rationalization of structures and shape, high-precision processing, strict material selection, strict heat treatment to achieve this objective. Therefore, a more user-friendly and more powerful, and have power tools do not have many strengths. Compared with the power tool has the following advantages.

    1. The ability to work

    (A). Both offer a variety of different working methods, such as: rotating, reciprocating, oscillating, impact and so on.

    (B). Speed adjustment and output power adjustment simple. Through the valve handle for operating and adjusting the control valve can be very simple manner.

    (C). Pneumatic tools on the speed range can provide more levels of choice, from 100rpm to 70000rpm.

    (D). By weight volume ratio of output power. In the case of the same power output, compared with a small light weight power tools.

    (E). There is no fever, and overload faults. Pneumatic tools more suitable for long working hours, without fever phenomenon, and even compressed air engine overload situation occurs, the tool simply stop turning, once the overload is the phenomenon of lift to resume normal operation, no effect on the tool, not any failure occurs.

    (F). In reciprocating motion, the pneumatic tool is used in piston movement, and power tools through the cam change, compared to pneumatic tools and more advantages.

    2. Environment for capacity

    (A). Strong water resistance. Although the tool immersion harmful, but not as fatal as power tools harm. And because not produce sparks, so even if there is possibility of explosion in the use of fire explosion will not occur may be more suitable for coal, oil and other posts to use.

    (B). Pneumatic tools in a variety of bad or poor working environment, but must do maintenance work (dust, in addition to water, oil, etc.). Air pump air tools you can use the internal combustion engine, it is more suitable for field work, pneumatic tools to work long hours for large-scale production line.

    3. Economy

    (A). Power tools lower the initial investment, but long-term use of high energy consumption, and tool maintenance, replacement cost is higher.

    (B). Pneumatic tools pneumatic tube to establish the initial investment required equipment, but the long-term use in energy consumption and the tools to maintain the low cost.

    (C). The weight of power tools pneumatic tools are generally 3 to 4 times, not suitable for long working hours, and pneumatic tools actually improve efficiency.

This is the Instructable for this video www.instructables.com This is my entry to the Craftsman Workshop of the future contest, at Instructables. I will show how to build a on-board air compressor from a mopar RV2 AC compressor and a on-board welder from a delco CS-144 alternator. This is part 1 of 2

Now Pneumatic Tools And electrical and electronic, hydraulic, as is the production process automation is one of the most effective technology, widely used in various departments, according to statistics in the industrialized countries, the fully automated process with about 30% of the pneumatic system. Air China starts manufacturing and technology research and application start later, there is great development over the past decade. Pneumatic technology has been gradually applied to various industrial sectors, the production has played a significant benefit.

Recalled in 2009, pneumatic tools market began to flourish together, but the market is not saturated, especially in the professional pneumatic tools, in addition to several Taiwan-invested enterprises, domestic firms engaged in manufacturing professional pneumatic tool manufacturer is not more. With the United States, Germany and Japan, and many other professional-grade pneumatic tool manufacturers because of rising domestic production costs, will gradually be transferred to a variety of high-end domestic production of pneumatic tools, now go have some domestic production. The conversions at the same time, Europe and the United States pneumatic tool manufacturers will carry out internal audits of production companies, but according to experience, only a handful can be approved, mainly based on very weak, including testing equipment, Management System, processing equipment, technology and so on. This means that domestic manufacturers can only do DIY tools, tools, prices dropped lower and lower, with the national tax system reform, many pneumatic tool manufacturers will face a crisis of survival.

Through the product structure adjustment, improve management, China’s air industry since the late 90s of the 20th century, has maintained a good momentum of economic operation. Pneumatic products as easy and inexpensive automated devices, not only in mechanical and electrical, textile, Home Appliances Traditional areas such as large market share, but also in the emerging information technology industry, bio-products industry, micro-processing industry and other fields is satisfied has a broad development space. The author believes that the next few years the development of China’s air industry will present the following trends:

To the forward line of brand management

As more and more operators of pneumatic tools for brand management to the line forward, a number of domestic and international famous quality products have been introduced to meet different consumer needs. Pneumatic tools is one of them. According to reports, its manufacturing technology, materials and measurement control better than Power Tools Is more advanced. The pneumatic tools and electronic appliances, hydraulic, as is the production process automation is one of the most effective technology, widely used in various departments, according to statistics in the industrialized countries, the fully automated process with about 30% of the pneumatic system.

Rapid development of China’s pneumatic system and also led the development of pneumatic tools, more and more businesses are optimistic about pneumatic tools market, on the one hand because of its relatively high technical requirements, before most of the products mainly from the United States, Germany , Japan’s national introduction of Hardware City Market products mainly produced in Taiwan are most common. And now, with increased domestic production technology, such as Wenzhou, Shanghai, some companies have introduced a pneumatic tool products. Pneumatic tools and a wide range, Guangdong, Shanghai, Jiangsu, Fujian and other coastal provinces and municipalities assembly industry Machinery Industry, transport, and Yong Kang scooters, electric bicycles, motorcycles, there is an auto repair shop and assembly line operations of some companies and manufacturers have continued to use the pneumatic tools.

Air tools or pneumatic tools are high performance tools such as drills, grinders and wrenches which unlike power tools fuelled by electricity, use compressed air. Tucker Fasteners currently offer a selection of air tools suitable for riveting. The POP proset 2500 is an excellent pneumatic rivet tool and is complemented by its sister product, the POP proset 3400. Chicago Pneumatic offers a comprehensive and exhaustive range of pneumatic tools which are all resplendent in the red and black Chicago colour-way.

The Chicago range includes angle die grinders, pneumatic drills, belt sanders, orbital sanders, riveters, ratchet wrenches , air file tools, engraving pens and pneumatic screwdrivers,.  Chicago pneumatic has a proud history of producing high quality and high value tools and compressors which are designed and engineered for high performance and durability. With a background in supplying the industrial production, automotive, construction and mining sectors, the firm has constantly been committed to quality and innovation throughout its product range.

Measuring tools are essential for any tradesman or   serious DIY enthusiast who wants to ensure that the job in hand is completed with perfection and precision. Nowadays, there is a fantastic selection of handy measuring tools available online. Contractor 1st offers a great range of heavy duty measuring tapes, rafter squares, and torpedo levels. Roebuck, Starrett and Stanley also offer fine ranges of hand held measuring tapes and chalk lines. Roebuck produce an excellent carbon fibre digi-caliper and inspection mirror which allows you a clear view of those impossible angles. For large measurements, perhaps a 100m glass fibre measuring tape from a firm such as Roebuck is the ideal choice.

Checking that measurements are precise and that all proportions are level are basic principle s of all DIY and construction work. As technology has progressed, measuring tools have perhaps become more sophisticated, but the principles remain the same as when our ancestors constructed the Pyramids of Egypt!